GP-XC8S-P - Panasonic GP-XC8S-P Sensor - 8mm Non-Threaded Head, Shielded 0 -...
Request Quote
For Price
- Part Number:
- GP-XC8S-P
- Model Number:
- GP-XC8S-P
- Make:
- PANASONIC
- Lead Time:
- Available
- Qty In Stock:
- Available
Panasonic GP-XC8S-P Sensor - 8mm Non-Threaded Head, Shielded 0 - 0.079 in +/- 5V PNP Simple Type: Sensor
The GP-X series of inductive displacement sensors provides an ultra high-speed, accurate measurement solution for all of your metallic applications. A 0.02% F.S. resolution and 0.3% F.S. linearity allow for the sensor to distinguish even the smallest of changes. This sensor is also usable on high-speed manufacturing lines due to its ultra high-speed 25 microsecond sampling speed
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Height Sensing Mode
- Manual Setting Mode
- Rotation/Eccentricity/Vibration Mode
- Stroke End Sensing Mode
- The 5-digit, dual, 2-color digital display offers great visibility
Specifications
- Accessory: ATA4811 (Controller mounting frame): 1 set
- Ambient Humidity: 35 to 85 % RH, Storage: 35 to 85 % RH
- Ambient Temperature: 0 to +50 °C +32 to +122 °F (No dew condensation),
- Analog voltage outputs: Output voltage: -5 to +5 V (Note 4), Output impedance: 100 O approx.
- Comparative outputs (HI, GO, LO): PNP open-collector transistor. Maximum source current: 100 mA. Applied voltage: 30 V DC or less (between comparative output and 0 V). Residual voltage: 1.6 V or less (at 100 mA source current) 0.4 V or less (at 16 mA sink current)
- Current consumption: 150 mA or less
- EMC: EN 61000-6-2, EN 61000-6-4
- External input: Photo-coupler input. Input current: 9 mA or less. Operating voltage: ON voltage 17 V or more (between +24 V and input). OFF voltage 4 V or less (between +24 V and input) Input impedance: 5 kO approx.
- GO: Green LED (lights up when within the upper and lower limit value)
- HI: Orange LED (lights up when the upper limit value is exceeded)
- Indicators: MODE Orange LED (lights up when in mode status)
- Linearity (Note 2): Within ±0.3 % F.S.
- LO: Orange LED (lights up when less than the lower limit value)
- Lower level digital display part: 5 digit green LED (display of numerical values within the upper and lower limit value)
- Material: Enclosure: Polycarbonate
- Output Number: HI / GO / LO 3 value output
- Output operation: HI : ON when measured value > the upper limit value GO: ON when upper limit value / measured value / lower limit value LO : ON when lower limit value > measured value
- Pollution Degree: 3 (Industrial environment)
- Resolution (Note 2): GP-XC3SE / GP-XC5SE: 0.04 % F.S. (64 times average processing)
- Response Time: 75 µs (maximum speed)
- Sampling frequency: 40 kHz (25 µs)
- Serial I/O: RS-232C
- Shock Resistance: 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each
- Short-Circuit Protection: Incorporated
- Supply Voltage: 24 V DC ± 10 % Ripple P-P 10 % or less
- Temperature characteristics (Note 3): 0.07 % F.S./°C or less
- Timing: Green LED (lights up as per the external or internal trigger timing)
- Upper level digital display part: 5 digit orange LED (display of numerical values out of upper and lower limit value)
- Utilization category: DC-12 or DC-13
- Vibration Resistance: 10 to 55 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each
- Weight: Net weight: 120 g approx.
- Zero-set setting method: Push button setting / External input setting
Applications
- None Available
Aliases
- None Available